Product Reviews

Silkland DP80 DisplayPort Cable Review

A short, high-bandwidth DisplayPort cable for gamers connecting a DP 2.1 graphics card to a nearby compatible monitor.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The Silkland DP80 DisplayPort Cable review is most relevant to gamers building a short, direct connection between a DisplayPort graphics card and monitor.

Its 80Gbps DP 2.1 specification and unusually broad high-refresh mode support make compatibility the key buying question.

Silkland DP80 Cable Review Summary

The quick verdict

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short, high-bandwidth DisplayPort cable for gamers connecting a DP 2.1 graphics card to a nearby compatible monitor.

  • VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; higher listed modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz with DSC enabled.
  • Includes support for VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3.
  • Male-to-male DisplayPort connectors, a no-latch design, and a 1.6-foot cable length.

Pros

  • High 80Gbps bandwidth and support for demanding high-resolution, high-refresh display modes.
  • Short cable length can keep a nearby PC-and-monitor connection tidy.

Consider before buying

  • At 1.6 feet, it may not reach comfortably if the PC and monitor ports are separated or difficult to access.
  • The highest listed resolutions and refresh rates depend on DSC where specified, and on the capabilities of both the graphics card and monitor.
Read the full review summary

At 1.6 feet, this cable is designed for a close connection between a PC and monitor, such as a desktop positioned beside or beneath a display.

The VESA-certified DP 2.1 connection supports up to 80Gbps, with listed modes that include uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; higher modes are listed with DSC enabled.

It is a compelling fit when both ends of the setup can take advantage of DP 2.1 UHBR20 and the short reach works for the desk layout.

The compact length, male-to-male DisplayPort connectors, and no-latch design leave little flexibility for routing or unplugging frequently, so check the port locations and monitor requirements before choosing it.

The buying factors

Silkland DP80 Cable Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Bandwidth ceiling

The 80Gbps DP 2.1 UHBR20 specification offers substantial headroom for demanding display modes when the connected devices support them.

9/10

High-refresh mode range

The supplied modes include uncompressed 4K at 240Hz and 2K at 540Hz, plus higher resolutions or refresh rates with DSC enabled.

7/10

Short-run suitability

Its 1.6-foot length suits close PC-to-monitor connections but can constrain layouts with distant or awkwardly placed ports.

8/10

Compatibility flexibility

Backward compatibility with DP 2.0 and 1.4 broadens its potential use, though the highest modes depend on the whole display chain.

8/10

Build and handling

A nylon exterior, triple shielding, tinned copper conductors, and a no-latch connector design are practical details for a desktop cable.

8/10

Gaming and audio features

The listed support for VRR, ALLM, FEC, MST, HDR, and multichannel audio suits gaming and multi-display setups, subject to device support.

Key Features and Specifications of Silkland DP80 Cable

  • VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; higher listed modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz with DSC enabled.
  • Includes support for VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3.
  • Male-to-male DisplayPort connectors, a no-latch design, and a 1.6-foot cable length.
  • 28AWG tinned copper conductors, triple shielding, 24K gold-plated connectors, and a nylon exterior.
  • Backward compatible with DP 2.0 and DP 1.4, with uncompressed 7.1, 5.1, and 2.0 audio pass-through support.
  • Silkland lists 24-month service and technical support within 18 hours.

Pros and Cons of Silkland DP80 Cable

Pros

  • High 80Gbps bandwidth and support for demanding high-resolution, high-refresh display modes.
  • Short cable length can keep a nearby PC-and-monitor connection tidy.
  • No-latch connectors are designed for straightforward plug-in and removal.
  • Build details include triple shielding, tinned copper, gold-plated connectors, and a nylon exterior.
  • Backward compatibility and support for gaming features such as VRR, ALLM, and MST add flexibility across suitable setups.

Consider before buying

  • At 1.6 feet, it may not reach comfortably if the PC and monitor ports are separated or difficult to access.
  • The highest listed resolutions and refresh rates depend on DSC where specified, and on the capabilities of both the graphics card and monitor.
  • A DisplayPort-to-DisplayPort cable is not a fit for setups that need HDMI or another connector type.

Who Should Buy Silkland DP80 Cable?

Good fit

Choose the Silkland DP80 if your gaming PC and monitor sit close together and both have DisplayPort ports.

The 80Gbps DP 2.1 bandwidth and listed high-refresh modes make it a strong match for a system built around a compatible DP 2.1 UHBR20 graphics card and display.

Its short reach is also useful when you want only enough cable to bridge a nearby connection. The no-latch design can make removal simpler, while the nylon exterior and shielding provide practical construction details for regular desktop use.

Before buying, check the monitor and graphics card specifications for the resolution, refresh rate, and features you intend to use.

Confirm whether your target mode uses DSC, and measure the route between the actual ports so the 1.6-foot length is sufficient.

Who should skip it

Skip this cable if your PC and monitor need a longer run, or if either device lacks a DisplayPort connection. Measure the real cable path, including any bends around the desk, before settling on this short length.

It is not the right choice if you expect the cable alone to unlock its highest modes. Those depend on compatible capabilities at both ends, and the higher listed modes use DSC.

How the Silkland DP80 Cable fits a high-refresh setup

Bandwidth and display modes

The DP 2.1 UHBR20 specification and up-to-80Gbps bandwidth are the cable’s main differentiators.

Its listed uncompressed modes cover 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz, while higher combinations such as 16K at 60Hz or 4K at 540Hz are specified with DSC.

Buyers should treat these as supported configurations for a compatible chain, not as a promise that every display and graphics card can produce them.

Length and desk layout

A 1.6-foot cable is a deliberate choice for a compact setup.

It can reduce excess slack when the computer is immediately beside or below the monitor, but leaves little allowance for moving equipment, routing around a monitor arm, or reaching ports set back from the desk.

Measuring the port-to-port path is more useful than estimating from the distance between the devices’ cases.

Gaming and multi-display use

VRR, ALLM, FEC, and DSC 1.2a are among the listed gaming-related technologies, while MST can support multi-monitor arrangements. The practical benefit depends on the connected equipment and configuration.

The product description also recommends using the same cable type across multiple screens, so users planning a mixed connection should check the setup requirements for their monitors and graphics card.

Construction and connector handling

The cable combines 28AWG tinned copper conductors, triple shielding, gold-plated connectors, and a nylon exterior. The no-latch connector avoids a release tab, which may be convenient where access is tight.

Since the cable is short, its construction is most relevant to a fixed nearby connection rather than a route that requires substantial slack.

Alternatives to Silkland DP80 Cable

Only one supplied alternative offers a useful difference for this short, high-bandwidth DisplayPort use case.

Computer DisplayPort Cables alternative

Silkland 54Gbps 16K DisplayPort Cable, 10 ft
4.6/5

7,000+ ratings

Read Amazon Reviews

Silkland 54Gbps 16K DisplayPort Cable, 10 ft

Choose the 10-foot model if your setup needs more reach and its listed bandwidth and modes suit your display.

The DP80 is the closer fit for a short connection where its higher bandwidth and listed high-refresh modes match compatible devices.

  • This 10-foot Silkland cable is rated at 54Gbps and lists support for 8K at 120Hz, 4K at 240Hz, and 2K at 360Hz, with DSC specified for 16K at 60Hz.
  • It includes a double nylon braid and a grooved, no-buckle connector design.
  • The DP80 is a 1.6-foot cable rated for up to 80Gbps, with listed support for uncompressed 4K at 240Hz and 2K at 540Hz.

Is Silkland DP80 Cable Worth It?

The Silkland DP80 DisplayPort Cable is worth considering for a nearby gaming monitor connection when both devices support DisplayPort and the desired mode fits their capabilities.

Its 80Gbps DP 2.1 specification, gaming feature support, and detailed shielding and jacket construction make it a strong short-cable option.

The deciding tradeoffs are its 1.6-foot reach and the need for compatible devices to use the headline display modes. Measure the cable path and confirm your monitor and graphics card specifications before choosing it.

Your review at a glance

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short, high-bandwidth DisplayPort cable for gamers connecting a DP 2.1 graphics card to a nearby compatible monitor.

  • VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; higher listed modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz with DSC enabled.
  • Includes support for VRR, FEC, ALLM, DSC 1.2a, MST, dynamic HDR10+, 3D, and HDCP 2.3.
  • Male-to-male DisplayPort connectors, a no-latch design, and a 1.6-foot cable length.

Written by

atlantaplanit.com Editorial Team

Editorial team

atlantaplanit.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Silkland DP80 DisplayPort Cable

Silkland DP80 DisplayPort Cable

A short, high-bandwidth DisplayPort cable for gamers connecting a DP 2.1 graphics card to a nearby compatible monitor.

  • VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; higher listed modes include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz with DSC enabled.
Check Video Reviews on Amazon