Product Reviews

SmallRig Cold Shoe Mount Review: A Two-Pack for Camera Rigs

A practical fit for camera-cage users who need simple cold-shoe points for a microphone, flash, or LED accessory.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Cold Shoe Mount review is for camera-rig users who need straightforward attachment points for small accessories. This two-pack adds cold-shoe positions to compatible cages, handles, plates, or other accessories with the specified threaded holes.

SmallRig Shoe Mount Review Summary

The quick verdict

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical fit for camera-cage users who need simple cold-shoe points for a microphone, flash, or LED accessory.

  • Two cold-shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm, or about 0.98 × 0.98 inches.
  • Aluminum-alloy construction.
  • Mounts to accessories with 1/4-inch or M2.5 threaded holes using the included screws.

Pros

  • The two-pack can add accessory positions in more than one place on a rig.
  • Includes both 1/4-inch-20 and M2.5 mounting screws for different compatible threaded holes.

Consider before buying

  • The mount is a fixed shoe, so buyers seeking adjustable accessory angles should consider whether their rig needs a separate positioning joint.
  • Compatibility depends on the available threaded holes and screw arrangement; check the cage or plate before ordering.
Read the full review summary

The SmallRig Cold Shoe Mount 2060 is a compact aluminum-alloy adapter designed to give a compatible camera support a standard cold shoe.

Its 25 mm square footprint and included 1/4-inch-20 screws make it a simple option for adding a microphone, flash, or LED to a cage, handle, or plate.

The main appeal is the pair of mounts and the included hardware: each can be secured with the 1/4-inch-20 screw or, where appropriate, the two M2.5 screws. This suits creators building a cage setup with fixed accessory positions.

Check the mounting pattern on your rig first, and note the explicit exclusions for DJI and Zhiyun gimbals.

The buying factors

SmallRig Shoe Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

Supports attachment to compatible accessories with 1/4-inch or M2.5 threaded holes, with the correct screw choice depending on the setup.

8/10

Accessory compatibility

The cold shoe is intended for common camera accessories such as microphones, flashes, and LED lights.

9/10

Included hardware

The package includes two mounts, two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.

7/10

Setup simplicity

Arrow markings indicate mounting orientation, and the mount uses screws for a fixed attachment.

5/10

Positioning options

This is a fixed cold-shoe mount; the description does not identify an angle-adjustment mechanism.

6/10

Rig compatibility checks

The threaded mounting points provide useful options, but buyers need to confirm their cage or accessory's pattern and heed the stated gimbal exclusions.

Key Features and Specifications of SmallRig Shoe Mount

  • Two cold-shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm, or about 0.98 × 0.98 inches.
  • Aluminum-alloy construction.
  • Mounts to accessories with 1/4-inch or M2.5 threaded holes using the included screws.
  • Designed to hold a microphone, flash, or LED on a compatible camera cage, handle, plate, or similar accessory.
  • Two white arrows mark the mounting direction; a pair of bent bevels at one end is designed to help prevent accidental removal.
  • Package includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.

Pros and Cons of SmallRig Shoe Mount

Pros

  • The two-pack can add accessory positions in more than one place on a rig.
  • Includes both 1/4-inch-20 and M2.5 mounting screws for different compatible threaded holes.
  • Compact square footprint is suited to small camera supports.
  • Arrow markings help communicate the intended mounting direction.

Consider before buying

  • The mount is a fixed shoe, so buyers seeking adjustable accessory angles should consider whether their rig needs a separate positioning joint.
  • Compatibility depends on the available threaded holes and screw arrangement; check the cage or plate before ordering.
  • The mount is explicitly not suitable for DJI or Zhiyun gimbals.

Who Should Buy SmallRig Shoe Mount?

Good fit

Consider this two-pack if you have a camera cage, handle, plate, or other accessory with a matching threaded hole and want to add a standard cold shoe for a microphone, flash, or LED.

Having two mounts can be useful when you are building out a rig with more than one accessory position.

Before buying, identify the threaded pattern at the intended mounting point and choose the corresponding included screw.

For cage use, the product notes that most compatible cages need only the 1/4-inch-20 screw; it gives the SmallRig Full Cage 1661 as an exception that requires a different approach. Confirm the arrangement for your exact setup.

Who should skip it

Skip this mount if your planned use is on a DJI or Zhiyun gimbal, which the product specifically excludes.

Also look elsewhere if you need the accessory itself to tilt or rotate, since this mount is described as a fixed cold shoe rather than an adjustable joint.

How the SmallRig Shoe Mount Fits a Camera Rig

A compact way to add a shoe

At 25 mm square, each mount takes up a small footprint on a compatible cage, handle, or plate.

The cold shoe gives a mounting point for accessories such as a microphone, flash, or LED, so the key decision is whether your rig has a suitable threaded location where the accessory will be useful.

Choose the screw for the mounting point

The package provides 1/4-inch-20 and M2.5 screws, supporting two threaded-hole types. That flexibility does not make the mount universal: inspect the hole and clearance on the chosen support, then use the fitting hardware.

The product notes that most cages use the 1/4-inch-20 screw alone, with the SmallRig Full Cage 1661 called out as an exception.

Orientation and retention details

White arrows show the mounting direction, while two bent bevels at one end are intended to help resist accidental removal. These details are useful on a small adapter where correct orientation matters.

They do not replace checking that the mount is fully secured with the appropriate screw.

A fixed point rather than an angle-adjusting arm

This design creates a stable accessory position on the rig, but the product description does not provide an angle-adjustment feature.

If you need to aim a light or reposition a monitor after mounting, decide whether a separate adjustable mount belongs in your setup.

Alternatives to SmallRig Shoe Mount

Camera Flash Shoe Mounts alternative

SmallRig Double Ball Head Adapter 1135
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Adapter 1135

Choose the 2060 if you want two simple fixed shoe positions and your rig has matching threaded holes.

Consider the 1135 if angle adjustment is central to your setup and its single articulated mount and stated weight recommendation fit the accessory.

  • The Double Ball Head Adapter 1135 uses a double ball head with a cold shoe and 1/4-inch screw on both ends, and its ball mount can rotate up to 180 degrees before being secured with a side wingnut.
  • Its maximum weight recommendation is 1 kg, and the product advises against using it with a monitor or LED light over that amount.
  • The SmallRig Cold Shoe Mount 2060 creates a fixed cold-shoe position and comes as a two-pack with screws for compatible threaded holes.

Camera Flash Shoe Mounts alternative

SmallRig Mini Ball Head Mount 3577
4.5/5

700+ ratings

Read Amazon Reviews

SmallRig Mini Ball Head Mount 3577

The 2060 is the more relevant fit for adding two fixed cold shoes to threaded rig points.

Choose the 3577 if a single lightweight mount with tilt adjustment and its 250 g device limit better matches your positioning needs.

  • The Mini Ball Head Mount 3577 weighs 20 g, supports devices up to 250 g, and tilts up to 138 degrees.
  • It has a 1/4-inch screw on top and a cold-shoe adapter at the base, with toolless installation described for attaching its base to a camera or cage.
  • The 2060 supplies two fixed cold shoes that attach to compatible threaded holes on a cage, handle, plate, or similar support.

Is SmallRig Shoe Mount Worth It?

The SmallRig Cold Shoe Mount 2060 is worth considering for a cage-based camera rig that needs straightforward accessory points.

Its two-mount package, compact aluminum-alloy design, and included screw options make it a practical add-on when the mounting pattern matches.

Check the exact threaded holes and setup before ordering, especially if using a cage model with a specific mounting requirement.

Buyers who need angle adjustment should choose a mount designed for that purpose, and this model is not intended for DJI or Zhiyun gimbals.

Your review at a glance

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical fit for camera-cage users who need simple cold-shoe points for a microphone, flash, or LED accessory.

  • Two cold-shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm, or about 0.98 × 0.98 inches.
  • Aluminum-alloy construction.
  • Mounts to accessories with 1/4-inch or M2.5 threaded holes using the included screws.

Written by

atlantaplanit.com Editorial Team

Editorial team

atlantaplanit.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Cold Shoe Mount 2060

SmallRig Cold Shoe Mount 2060

A practical fit for camera-cage users who need simple cold-shoe points for a microphone, flash, or LED accessory.

  • Two cold-shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm, or about 0.98 × 0.98 inches.
Check Video Reviews on Amazon